KASHI technical intervention glove

Technical gloves for protection against mechanical and thermal risks. This model offers enhanced protection on the back of the hand, thanks to a protective lining in that area. The gloves are hydrophobic and oleophobic, and user comfort is ensured by a sophisticated anatomical cut with raised seams at the fingertips.

EXTERIOR MATERIAL:

• Back: flame-resistant textile with hydrophobic and oleophobic treatment.
• Palm and interstices: elastic para-aramid / polyamide knit with silicone coating.

REINFORCEMENTS:

• Protection of the joints on the back of the hand against abrasion and impacts – Kevlar® / polyamide with flame-retardant coating and foam padding.
• The reinforcement between the thumb and index finger, made of Kevlar® fabric with a flame-retardant coating, covers the side seams; thanks to its high abrasion resistance, it increases the durability of the glove.

LINING:

• Palm and back: Para-aramid/polyester/fibreglass knitted lining – high cut resistance.
• Cuff: flame-retardant inner knit preventing dirt from penetrating the glove.

CUT-RESISTANT INTERMEDIATE LAYER:

• Palm: 100% aramid non-woven fabric.

HEADLINE:

• Evo: Elasticated cuff finished with an anti-dirt elastic band.

OTHER INFORMATION:

• Anatomical fit, breathability, sensitivity, flexibility.
• Fully flame-retardant glove.
• Highly hydrophobic and oleophobic.
• High resistance to mechanical risks at the palm and back.
• Above-average mechanical resistance between the fingers.
• Excellent grip and sensitivity thanks to the special design of the extended fingertips.
• High-visibility reflective element on the back of the glove.
• Comfortable – flexible – anatomical cut including the thumb.

MAINTENANCE AND UPKEEP:

• Choose a short, more environmentally friendly wash program at 40°C. Wash at a maximum temperature of 60°C if you need to disinfect the gloves or if they are extremely dirty.
• PROCEDURE: Remove loose soiling after each use. Before washing, close the Velcro strips and remove the snap fasteners. Use liquid detergent. Wash on a short cycle.
• FOR A BETTER GLOVE FIT: Reshape the glove several times after washing and during drying. Do not dry in direct sunlight or near a heat source; do not use a tumble dryer. Store the gloves in a dry place.

RECOMMENDED USE:

• Holík washing gel
• This naturally derived washing gel is designed for leather and textile gloves and offers highly effective cleaning. It reduces bacteria,
• does not pollute the environment and is fully biodegradable (Eco-Friendly).
• Holík waterproofing spray
• Highly effective waterproofing spray for leather and textiles, protecting against moisture, water, oil, and dirt while preserving the material's breathability. Apply a thin coat of the waterproofing spray to a dry item and allow to dry for at least 12 hours.
• Colour: Neon Yellow

Standards: EN ISO 21420:2021